The correct way to install steel coils

The correct method of loading steel coils mainly involves choosing the appropriate loading method and using appropriate fixtures to ensure safety during transportation. Below is a detailed guide to loading steel coils:

Choose the appropriate loading method:

When the ratio of the width to diameter of the steel plate coil is less than or equal to 0.7, the vertical loading method should be selected, in which the hole axis of the steel plate coil is perpendicular to the loading plane.
When the ratio of the width to diameter of the steel plate coil is greater than 0.7 and the width is smaller than the width of the vehicle, the horizontal horizontal loading method should be selected, in which the hole axis of the steel plate coil is parallel to the loading plane and perpendicular to the side of the vehicle.
When the ratio of the width to diameter of the steel plate coil is greater than 0.7 and the width is greater than or equal to the vehicle width, the horizontal longitudinal loading method should be selected, in which the hole axis of the steel plate coil is parallel to the loading plane and parallel to the side of the vehicle.
Use appropriate fixtures:

When loading steel coils, the bottom should be padded with rubber sheets or an adjustable mount should be used to increase support and stability.
Fastening devices (such as fastening straps, wire ropes, chains, etc.) must be used for bundling and fixation to ensure the stability of the steel coils during transportation.
For steel plate coils with a single coil mass not exceeding 35 tons, horizontal transverse loading is applicable.
Precautions:

Prevent the steel coil from sliding or shifting during transportation due to inertia under sudden braking and other circumstances.
During transportation, it is not recommended to use wooden squares as fixed seats to prevent the steel coil from sliding under the action of inertia such as sudden braking.
Before transportation, the transportation tools and road conditions should be checked to ensure the safety of the transportation process.

By following the above guidelines, the safety and stability of steel coils during transportation can be effectively ensured.